Disable Restore Configuration
The System Restore is a feature that runs the backup system and the registry. If your system is infected with the virus is implemented in the backup. Therefore Prior to removal must disable this feature.
For Windows XP operate in this way
1) click with the right mouse button on My Computer in the drop-down menu that appears, click on Properties
2) Select the tab "System Restore"
3) Select "Disable system restore"
4) Press OK. There appear a confirmation notice will be deleted all restore points stored press the button SI
Starts Provisional Methods
The startup mode is a special feature of Windows systems diagnostics. This is necessary when Antivirus can detect the infection but can not remove it.
In launching the system in this mode, also called Safe Mode, are loaded minimum components and drivers necessary for the functioning of the operating system. In this way the virus is able to perform his job and clean up the infected files.
To start in Safe Mode simply turn on the computer and press the F8 key on the keyboard immediately after the test Bios and the window frame select Start in safe mode with the arrow keys and press Enter.
If for any reason the transaction does not happen you can run in this way.
Start the computer normally and when the operating system is loaded performed these operations
Diagnostic function for Windows systems. This is necessary when Antivirus can detect the infection but can not remove it.
In launching the system in this mode, also called Safe Mode, are loaded minimum components and drivers necessary for the functioning of the operating system. In this way the virus is able to perform his job and clean up the infected files.
To start in Safe Mode simply turn on the computer and press the F8 key on the keyboard immediately after the test Bios and the window frame select Start in safe mode with the arrow keys and press Enter.
If for any reason the transaction does not happen you can run in this way.
Start the computer normally and when the operating system is loaded performed these operations
1) Click on Start menu, select Run Start
2) In the window that appears, type msconfig and press the OK button
3) In the form that will select the BOOT.INI tab and check the / SAFEBOOT
4) Restart the system which returns in Safe Mode
Antivirus Scanning On Line and ActiveX
And 'can Scans online sites of various manufacturers Antivirus. Once connected to the site there is downloaded into our Hard Disck a file containing an updated list of known viruses and subsequently occurs scanning itself. To allow the operation must have done the ActiveX settings activated. To ensure that the transaction occurs operate in the following manner.
1) Click on Start, select Control Panel and then Settings Internet
2) Click on Settings twice Internet and from that comes up select the Security tab
3) Click on the button Default Level
4) Press the Apply button and confirm the operation to the message that appears
Click on OK and then start scanning Online (NoTrace Online Virus Scan)
Show hidden files and system
In case of infection by viruses, for a cleanup of the system is always appropriate to view hidden files system because some viruses can allocarsi in hidden system folders. Make them visible to operate in this way.
Do Double-click My Computer, then click on tools, and then you go to the View
In the window that appears, select the option "Show hidden files and folders" and deselect the option
"I do not see extensions for recorded files"
Click Apply and exit
Create a restore point system
It 'a very useful feature that lets you save the configuration of the machine in case of infection from viruses once you clean the system and are sure of perfect functioning of all applications it is useful to create a restore point. To create operate in this way Push Start - Programs - Accessories - Utilities System - System Restore. In the window that appears, click Create a restore point, click Next, place and description (eg the date you created The restore point) click Create.
System Restore
If you notice anomalies in the functioning of the operating system, you can restore your system to a configuration that we previously saved with "Create restore point." To do this work as follows:
Press Start - Programs - Accessories - Utilities System - System Restore. In the window that appears, click Next, you see a screen with a calendar on the left, where are highlighted in bold restore points created. Selezionandone one, there appears in the box right of the changes made at that specific point of recovery.
Click on what you consider running or which excludes changes that you made and then click Next. At this point you start the repair process which restarts your computer and makes changes to the system. This process ends with the message Restoration Completed
1) Click on Start menu, select Run Start
2) In the window that appears, type msconfig and press the OK button
3) In the form that will select the BOOT.INI tab and check the / SAFEBOOT
4) Restart the system which returns in Safe Mode
Antivirus Scanning On Line and ActiveX
And 'can Scans online sites of various manufacturers Antivirus. Once connected to the site there is downloaded into our Hard Disck a file containing an updated list of known viruses and subsequently occurs scanning itself. To allow the operation must have done the ActiveX settings activated. To ensure that the transaction occurs operate in the following manner.
1) Click on Start, select Control Panel and then Settings Internet
2) Click on Settings twice Internet and from that comes up select the Security tab
3) Click on the button Default Level
4) Press the Apply button and confirm the operation to the message that appears
Click on OK and then start scanning Online (NoTrace Online Virus Scan)
Diagnostic function for Windows systems. This is necessary when Antivirus can detect the infection but can not remove it.
In launching the system in this mode, also called Safe Mode, are loaded minimum components and drivers necessary for the functioning of the operating system. In this way the virus is able to perform his job and clean up the infected files.
To start in Safe Mode simply turn on the computer and press the F8 key on the keyboard immediately after the test Bios and the window frame select Start in safe mode with the arrow keys and press Enter.
If for any reason the transaction does not happen you can run in this way.
Start the computer normally and when the operating system is loaded performed these operations
1) Click on Start menu, select Run Start
2) In the window that appears, type msconfig and press the OK button
3) In the form that will select the BOOT.INI tab and check the / SAFEBOOT
4) Restart the system which returns in Safe Mode
Antivirus Scanning On Line and ActiveX
And 'can Scans online sites of various manufacturers Antivirus. Once connected to the site there is downloaded into our Hard Disck a file containing an updated list of known viruses and subsequently occurs scanning itself. To allow the operation must have done the ActiveX settings activated. To ensure that the transaction occurs operate in the following manner.
1) Click on Start, select Control Panel and then Settings Internet
2) Click on Settings twice Internet and from that comes up select the Security tab
3) Click on the button Default Level
4) Press the Apply button and confirm the operation to the message that appears
Click on OK and then start scanning Online (NoTrace Online Virus Scan)
Show hidden files and system
In case of infection by viruses, for a cleanup of the system is always appropriate to view hidden files system because some viruses can allocarsi in hidden system folders. Make them visible to operate in this way.
Do Double-click My Computer, then click on tools, and then you go to the View
In the window that appears, select the option "Show hidden files and folders" and deselect the option
"I do not see extensions for recorded files"
Click Apply and exit
Create a restore point system
It 'a very useful feature that lets you save the configuration of the machine in case of infection from viruses once you clean the system and are sure of perfect functioning of all applications it is useful to create a restore point. To create operate in this way Push Start - Programs - Accessories - Utilities System - System Restore. In the window that appears, click Create a restore point, click Next, place and description (eg the date you created The restore point) click Create.
System Restore
If you notice anomalies in the functioning of the operating system, you can restore your system to a configuration that we previously saved with "Create restore point." To do this work as follows:
Press Start - Programs - Accessories - Utilities System - System Restore. In the window that appears, click Next, you see a screen with a calendar on the left, where are highlighted in bold restore points created. Selezionandone one, there appears in the box right of the changes made at that specific point of recovery.
Click on what you consider running or which excludes changes that you made and then click Next. At this point you start the repair process which restarts your computer and makes changes to the system. This process ends with the message Restoration Completed
Show hidden files and system
In case of infection by viruses, for a cleanup of the system is always appropriate to view hidden files system because some viruses can allocarsi in hidden system folders. Make them visible to operate in this way.
Do Double-click My Computer, then click on tools, and then you go to the View
In the window that appears, select the option "Show hidden files and folders" and deselect the option
"I do not see extensions for recorded files"
Click Apply and exit
Create a restore point system
It 'a very useful feature that lets you save the configuration of the machine in case of infection from viruses once you clean the system and are sure of perfect functioning of all applications it is useful to create a restore point. To create operate in this way Push Start - Programs - Accessories - Utilities System - System Restore. In the window that appears, click Create a restore point, click Next, place and description (eg the date you created The restore point) click Create.
System Restore
If you notice anomalies in the functioning of the operating system, you can restore your system to a configuration that we previously saved with "Create restore point." To do this work as follows:
Press Start - Programs - Accessories - Utilities System - System Restore. In the window that appears, click Next, you see a screen with a calendar on the left, where are highlighted in bold restore points created. Selezionandone one, there appears in the box right of the changes made at that specific point of recovery.
Click on what you consider running or which excludes changes that you made and then click Next. At this point you start the repair process which restarts your computer and makes changes to the system. This process ends with the message Restoration Completed
Backup registry
And 'can back up the registry only acting in this way:
Press Start - in the form Run and type regedit, and press Enter. In the screen that appears on your left you will find the list of keys to the Windows registry. Please click on the first item "My Computer" and then from the menu bar click File - Export of the screen that appears choose a path and filename as you enter the date of backup. You hit saves and the register will be exported in the file
Reinstate registry
The procedure is the same as that followed to create the backup registry, but from the file menu choose "Import" look for the path where you saved the last backup, select the file and click save. The procedure will overwrite the current registry with what you have chosen
Disable Security Center in Windows Firewall (SP 2)
And 'may activating the centre of security with the Windows firewall if you install other products create conflicts between different software.
If you decide to use other software is necessary to disable the security center.
Work like this:
Start - Control Panel - administration tools - services, at this point look for the "Security Center" select and click on the link at the top left on "Stop" and then double click on "Security Center" in the form that appears in the center you will see a box with a dart right.
Please click on the down arrow and select "Disable".
If you want to just turn off the Windows firewall services always look for the "Windows Firewall" select and click on the link at the top left on "Stop" and then double click on "Security Center" and in the form that appears in the center You will see a box with a dart right.
